MT7 Series

4WD (FRONT WHEEL MECHANICAL ASSIST)

Go from 2WD to a 4WD with a simple press of a button.

INDEPENDENT PTO

Easiest PTO to operate that can be turned on or off with a switch.


STANDARD FULLY SYNCHRONIZED TRANSMISSION & 40×40 POWER SHUTTLE

Change gears without having to stop. 40 forward / 40 reverse gear transmission provides more operating speeds than others in its class for superior control, precision and safe operations for virtually any application. Includes creeper speed and hi/low button.

STANDARD 3 SETS OF REMOTE VALVES WITH DETENT

Adds functionality and improves ease of use by allowing attachment of hydraulically controlled implements without the high, additional costs like others in its class to add the remotes as options.

EXTENDABLE LOWER LINKS

With secondary Hydraulic Cylinder allows easier attachment of a wide variety of Category 2 implements with a 7,272 lb lift capacity.

STANDARD TILT & POWER STEERING

Makes turning easier, improves control and reduces fatigue

FENDER MOUNTED JOYSTICK FOR FRONT END LOADER

Easily accessible for maximum comfort and convenience.

3-POINT HITCH WITH HYDRAULIC AUTO-LIFT, DRAFT & POSITION CONTROL

Most convenient way to operate your 3-Point Hitch.

STANDARD REAR WORK LIGHT

Adjustable light to improve visibility where you need it.

STANDARD DRAW BAR

Increases the usefulness of the tractor without the additional optional cost.

7 PIN CONNECTOR

Provides electrical Power for implements when needed.

LARGE FUEL TANK

30.4 gallon capacity provides long operation times.

LS CRDI TIER 4 ENGINE

Generates more power with less noise, fuel consumption, vibration and emissions. Standard preheat starting aid helps starting in cold weather. Includes engine speed cruise control.

EASY OPEN ONE-PIECE STEEL HOODProvides accessibility for easy maintenance.

PREMIUM SEAT

The air suspension provides a comfortable ride. Swivel the seat up to 20 degrees to reduce the strain when looking rearward.


  • MT7101CPS

    ENGINE

    Type: 4-cylinder, CRDI, Water-cooled

    Model: FPT F5G

    Emission: Tier4

    Engine HP (Gross): 100.6

    PTO HP: 85.5

    Rated Speed (RPM): 2,200

    Displacement (cu. in.): 206.7

    Fuel Tank Capacity (gal): 30.4

    DRIVE TRAIN

    Transmission: Power Shuttle

    No. of Speeds: 40 x 40

    Forward Speed (mph): 0.1 ~ 22.7

    PTO

    Type: Independent / Ground Speed PTO

    Rear (rpm): 540/750/1,000

    HYDRAULIC SYSTEM

    Control System: Position / Draft

    Implement Pump (gpm): 15.7

    Steering Pump (gpm): 6.5

    Total Flow (gpm): 22.2

    Category, 3 Point Hitch: Category II

    Hitch Lift Capacity (lbs): 8,378

    Remote Ports: 3 Pairs (Front), 3 Pairs (Rear)

    DIMENSIONS

    Overall Length, Frame to Link (in.): 152.2

    Overall Width with Tires (in.): 78.7

    Wheelbase (in.): 90

    Height to Top (in.): 105.4

    Total weight without ballast, lbs: 7,714

    TIRE SIZE

    Front: 13.6 – 24

    Rear: 18.4 – 34

    WEIGHT

    Total weight without ballast, lbs: 7,714

  • Loader Specs

    FRONT END LOADER – LL6100

    Tractor Application: MT5 Series

    Bucker Size (in): 78

    Maximum Lift height (in): 126.5

    Clearance with Attachment Dump (in): 95.3

    Reach at Maximum Height (in): 5.7

    Maximum Dump Angle (deg.) 64

    Maximum Rollback Angle (deg.): 38

    Digging Depth (in): 7.0

    Overall Height in Carry Position (in): 64.2

    Lift Capacity(@ Pivot pin) (lbs.) 3,626

    Breakout Force(@ Pivot pin) (lbs.): 6,644

    Approx. Weight(Loader w/o Bucket)(lbs.): 1,232

  • Brochure


Share by: