MT4 Series

4WD (FRONT WHEEL MECHANICAL ASSIST)

Go from 2WD to a 4WD with a simple move of a lever.

INDEPENDENT PTO

Easiest PTO to operate that can be turned on or off with a switch.


STANDARD FULLY SYNCHRONIZED TRANSMISSION & 16×16 SYNCHRO SHUTTLE

Change gears without having to stop. 16 forward / 16 reverse gear transmission provides more operating speeds than others in its class for superior control, precision and safe operations for virtually any application. 

STANDARD 2 SETS OF REMOTE VALVES WITH DETENT

Adds functionality and improves ease of use by allowing attachment of hydraulically controlled implements without the high, additional costs like others in its class to add the remotes as options.

STANDARD TILT & POWER STEERING

Makes turning easier, improves control and reduces fatigue

FENDER MOUNTED JOYSTICK FOR FRONT END LOADER

Easily accessible for maximum comfort and convenience.

STANDARD FOLDABLE ROPS

Allows storage in low clearance buildings or sheds.

YOUR CHOICE OF TIRES AT NO ADDITIONAL COST*

Choose Ag, Industrial or Turf tires at no additional cost. * Subject to dealer inventory.

EXTENDABLE LOWER LINKS

Allows easier attachment of a wide variety of Category 2 implements with a 4,079 lbs capacity.

ERGONOMICALLY DESIGNED 3-POINT HITCH CONTROLS WITH HYDRAULIC AUTO-LIFT CONTROL

Easily accessible for maximum comfort and convenience.

STANDARD REAR WORK LIGHT

Adjustable light to improve visibility where you need it.

STANDARD DRAW BAR

Increases the usefulness of the tractor without the additional optional cost.

7 PIN CONNECTOR

Provides electrical Power for implements when needed.

LARGE FUEL TANK

Provides long operation times between fill-ups.

FLAT PLATFORM AND RUBBER MAT

Roomy, spacious and comfortable.

LS CRDI TIER 4 ENGINE

Generates more power with less noise, fuel consumption, vibration and emissions. Standard preheat starting aid helps starting in cold weather. Includes engine speed cruise control.

EASY OPEN ONE-PIECE STEEL HOODProvides accessibility for easy maintenance.

MODERN ERGONOMIC DESIGN

This compact is ergonomically designed .

DELUXE ADJUSTABLE SEAT WITH ARM RESTS AND RETRACTABLE SEAT BELT

Keeps you in a comfortable and safe position for maximum control.


  • MT458 Specs

    ENGINE

    Type: Vertical Water-Cooled 4Cycle Diesel Engine

    Model (Tier 4): L4C25-T

    Engine HP (Gross): 58

    PTO HP: 51.2

    Rated Speed (RPM): 2,500

    Displacement (cu. in): 152.8

    Fuel Tank Capacity (gal): 21.1

    Alternator(V-A): 12 – 70

    DRIVE TRAIN

    Transmission: Synchro Shuttle / Power Shuttle

    No. of Speed: F16 x R16

    Brakes: Wet, Multi Disc

    Steering: Hydrostatic Power Steering

    PTO

    Type: Independent

    Rear, rpm: 540

    HYDRAULIC SYSTEM

    Control System: Position/Draft

    Implement pump (gpm): 9.9

    Steering pump (gpm): 4.6

    Total flow (gpm): 14.5

    Category, 3 pt hitch: CAT II

    Hitch Lift capacity, lbs(Hitch end): 4,079

    Remote Valves: 2 pairs (Front), 2/3 pairs (Rear)

    DIMENSIONS

    Overall length with 3pt (in.): 138.6

    Wheelbase (in.): 80.3

    Min. overall width with Ag tires (in.): 70

    Height to top of Cab with Ag tires (in.): 103

    TIRE SIZE

    Ag Front/Rear: 9.5 – 20 / 16.9 – 24

    Industrial Front/Rear: 10.5/80 – 18 / 19.5L – 24

    Turf Front/Rear: 36 x 13.5 – 15 / 16.9 – 24

    WEIGHT

    Total weight without ballast (lbs.): 4,674

  • MT468 Specs

    ENGINE

    Type: Vertical Water-Cooled 4Cycle Diesel Engine

    Model (Tier 4): L4C25-T

    Engine HP (Gross): 68

    PTO HP: 60

    Rated Speed (RPM): 2,500

    Displacement (cu. in): 152.8

    Fuel Tank Capacity (gal): 21.1

    Alternator(V-A): 12 – 70

    DRIVE TRAIN

    Transmission: Synchro Shuttle / Power Shuttle

    No. of Speed: F16 x R16

    Brakes: Wet, Multi Disc

    Steering: Hydrostatic Power Steering

    PTO

    Type: Independent

    Rear, rpm: 540

    HYDRAULIC SYSTEM

    Control System: Position/Draft

    Implement pump (gpm): 9.9

    Steering pump (gpm): 4.6

    Total flow (gpm): 14.5

    Category, 3 pt hitch: CAT II

    Hitch Lift capacity, lbs(Hitch end): 4,079

    Remote Valves: 2 pairs (Front), 2/3 pairs (Rear)

    DIMENSIONS

    Overall length with 3pt (in.): 138.6

    Wheelbase (in.): 80.3

    Min. overall width with Ag tires (in.): 70

    Height to top of Cab with Ag tires (in.): 103

    TIRE SIZE

    Ag Front/Rear: 9.5 – 20 / 16.9 – 24

    Industrial Front/Rear: 10.5/80 – 18 / 19.5L – 24

    Turf Front/Rear: 36 x 13.5 – 15 / 16.9 – 24

    WEIGHT

    Total weight without ballast (lbs.): 4,674

  • MT468CPS Specs

    ENGINE

    Type: Vertical Water-Cooled 4Cycle Diesel Engine

    Model (Tier 4): L4C25-T

    Engine HP (Gross): 68

    PTO HP: 60

    Rated Speed (RPM): 2,500

    Displacement (cu. in): 152.8

    Fuel Tank Capacity (gal): 21.1

    Alternator(V-A): 12 – 70

    DRIVE TRAIN

    Transmission: Synchro Shuttle / Power Shuttle

    No. of Speed: F16 x R16

    Brakes: Wet, Multi Disc

    Steering: Hydrostatic Power Steering

    PTO

    Type: Independent

    Rear, rpm: 540

    HYDRAULIC SYSTEM

    Control System: Position/Draft

    Implement pump (gpm): 9.9

    Steering pump (gpm): 4.6

    Total flow (gpm): 14.5

    Category, 3 pt hitch: CAT II

    Hitch Lift capacity, lbs(Hitch end): 4,079

    Remote Valves: 2 pairs (Front), 2/3 pairs (Rear)

    DIMENSIONS

    Overall length with 3pt (in.): 138.6

    Wheelbase (in.): 80.3

    Min. overall width with Ag tires (in.): 70

    Height to top of Cab with Ag tires (in.): 100.6

    TIRE SIZE

    Ag Front/Rear: 9.5 – 20 / 16.9 – 24

    Industrial Front/Rear: 10.5/80 – 18 / 19.5L – 24

    Turf Front/Rear: 36 x 13.5 – 15 / 16.9 – 24

    WEIGHT

    Total weight without ballast (lbs.): 5,121

  • MT458CPS Specs

    ENGINE

    Type: Vertical Water-Cooled 4Cycle Diesel Engine

    Model (Tier 4): L4C25-T

    Engine HP (Gross): 58

    PTO HP: 51.2

    Rated Speed (RPM): 2,500

    Displacement (cu. in): 152.8

    Fuel Tank Capacity (gal): 21.1

    Alternator(V-A): 12 – 70

    DRIVE TRAIN

    Transmission: Synchro Shuttle / Power Shuttle

    No. of Speed: F16 x R16

    Brakes: Wet, Multi Disc

    Steering: Hydrostatic Power Steering

    PTO

    Type: Independent

    Rear, rpm: 540

    HYDRAULIC SYSTEM

    Control System: Position/Draft

    Implement pump (gpm): 9.9

    Steering pump (gpm): 4.6

    Total flow (gpm): 14.5

    Category, 3 pt hitch: CAT II

    Hitch Lift capacity, lbs(Hitch end): 4,079

    Remote Valves: 2 pairs (Front), 2/3 pairs (Rear)

    DIMENSIONS

    Overall length with 3pt (in.): 138.6

    Wheelbase (in.): 80.3

    Min. overall width with Ag tires (in.): 70

    Height to top of Cab with Ag tires (in.): 100.6

    TIRE SIZE

    Ag Front/Rear: 9.5 – 20 / 16.9 – 24

    Industrial Front/Rear: 10.5/80 – 18 / 19.5L – 24

    Turf Front/Rear: 36 x 13.5 – 15 / 16.9 – 24

    WEIGHT

    Total weight without ballast (lbs.): 5,121

  • MT468C Series

    ENGINE

    Type: Vertical Water-Cooled 4Cycle Diesel Engine

    Model (Tier 4): L4C25-T

    Engine HP (Gross): 68

    PTO HP: 60

    Rated Speed (RPM): 2,500

    Displacement (cu. in): 152.8

    Fuel Tank Capacity (gal): 21.1

    Alternator(V-A): 12 – 70

    DRIVE TRAIN

    Transmission: Synchro Shuttle / Power Shuttle

    No. of Speed: F16 x R16

    Brakes: Wet, Multi Disc

    Steering: Hydrostatic Power Steering

    PTO

    Type: Independent

    Rear, rpm: 540

    HYDRAULIC SYSTEM

    Control System: Position/Draft

    Implement pump (gpm): 9.9

    Steering pump (gpm): 4.6

    Total flow (gpm): 14.5

    Category, 3 pt hitch: CAT II

    Hitch Lift capacity, lbs(Hitch end): 4,079

    Remote Valves: 2 pairs (Front), 2/3 pairs (Rear)

    DIMENSIONS

    Overall length with 3pt (in.): 138.6

    Wheelbase (in.): 80.3

    Min. overall width with Ag tires (in.): 70

    Height to top of Cab with Ag tires (in.): 100.6

    TIRE SIZE

    Ag Front/Rear: 9.5 – 20 / 16.9 – 24

    Industrial Front/Rear: 10.5/80 – 18 / 19.5L – 24

    Turf Front/Rear: 36 x 13.5 – 15 / 16.9 – 24

    WEIGHT

    Total weight without ballast (lbs.): 5,121

  • Loader Specs

    LL5106 – FRONT END LOADER

    Bucker Size (in): 78

    Maximum Lift height (in): 116.3

    Clearance with Attachment Dump (in): 84.7

    Reach at Maximum Height (in): 6.6

    Maximum Dump Angle (deg.) 71

    Maximum Rollback Angle (deg.): 48

    Digging Depth (in): 4.1

    Overall Height in Carry Position (in): 67.6

    Lift Capacity(@ Pivot pin) (lbs.) 2,739

    Breakout Force(@ Pivot pin) (lbs.): 4,556

    Approx. Weight(Loader w/o Bucket), lbs.: 1,014

  • Brochures


Share by: